| Structure |
| System type | Single post tracking system |
| Maximum capacity per set | 4.8kWp ( Estimated with 600W PV-Modules ) |
| PV-Modules quantity per set | 8PCS |
| Tracking type | Single axis tracking with tilt angle |
| Tilt angle | 25°- 40°( S-N )( according to project ) |
| Tracking range | ±45°( E-W ) |
| Tracking accuracy | ±0.5° |
| Structural materials | HDG steel, Al-Mg-Zn Coating Steel |
| Foundation | Concrete foundation |
| Electrical |
|
| Solar tracking method | Astronomical algorithm + closed-loop control ( AI ) |
| Control system | MCU |
| Drive method | Slew drive |
| Motor type | 24V DC Motor |
| Power supply | AC-powered or self-powered ( with 8 PV modules ) |
| Manual operation | Yes |
| Environment |
| Wind load | Customized according to local condition |
| Operating temperature | -30℃ to +60℃ |
| Environmental pollution level | C5 |
| Other |
| Special tools | Equipped with debugging tools |
| Load design standard | GB, ASCE,BS EN,AS ( according to project ) |
| Protection function |
| Maximum operating wind speed | ≥18m/s ( Windy area ) |
| Night stow mode | Yes |
| Overheat prevention | Yes |
| Overload prevention | Yes |
| System fault self-diagnosis | Yes |
| System fault self-diagnosis | 4-5min |
Simple Accurate Efficient Energy-saving Automated Intelligent Residential Commercial Single-axis Solar Tracking System
Automated Intelligent Energy-saving Accurate Simple Efficient Residential Commercial Single-axis Solar Tracking System
